close
 |  |  |
 |
 |
 |
 |
|
|
*Models: |
DD350X |
XP Series |
DDSB |
DD500X |
DD750X |
| Ideal for | Hobbyist | Hobbyist & Serious DIYer | DIYer | DIYer to Professional | Professional |
| E-Z Align System |
|
|
|
|
|
| Variable Align System |
|
|
|
||
| Drill Bit Materials | High-speed steel, Carbide-Tipped Masonry, and TiN-coated bits | High-Speed Steel, Carbide, Cobalt, TiN-Coated, Carbide-Tipped Masonry |
High-Speed Steel, Carbide, Cobalt, TiN-Coated, Carbide-Tipped Masonry |
High-Speed Steel, Carbide, Cobalt, TiN-Coated, Carbide-Tipped Masonry |
High-Speed Steel, Carbide, Cobalt, TiN-Coated, Carbide-Tipped Masonry |
| Twist Bit Point Angles | 118º | 118º | 118º | 118º or 135º | 118º to 140º |
| Spur of Flat-Edge Bits, Screw Point Bits, and Angled Cutter Bits | Angle Adjustable up to 7º of skew, also sharpends screw tip, spurred and non-spurred, and angled cutters | ||||
| Drill Sizes | 3/32" to 1/2" | 3/32" to 1/2" Twist & Masonry Bits (Optional 3/4" Chuck) | 3/32" to 1/2" Twist & Masonry Bits 1/4" to 1 1/2" Spade Bits |
3/32" to 1/2" Twist & Masonry Bits (Optional 3/4" Chuck) | 3/32" to 3/4" Twist & Masonry Bits |
| Replaceable Sharpening Wheel |
|
|
|
|
|
| Creates and Restores Split Points | ** |  |
|
|
|
| Sharpens Left-Hand Drills | With Optional Chuck | With Optional Chuck |
With Optional Chuck |
||
| Adjusteable Material Take-Off | |
||||
|
Includes Carrying Case |
Available as an Accessory |
Available as an Accessory |
|
||
| *All models use 110V power source. **The 350X will convert split points to standard bits. |
|||||
Accessories available:
|
|||||
